Request Technical Briefing →
RoboFueler • Stand-Off Underway Refueling • A Proposed Transfer Architecture

The Fuel Stop That Never Stops the Ship

Refuel underway — and keep the big ships apart. RoboFueler is a proposed transfer architecture in which a floating structure and a mobile connection terminal bring the fuel connection to the ship, while the supply vessel stays hundreds of feet away and both keep sailing.

● Stand-off geometry — the big hulls never come alongside
● Fuel delivered on your route, while underway
● Active machinery on the supplier; a passive interface on your ship
Invented by Larry M Shultz — five decades of patented industrial technology • U.S. & international patents pending • in engineering development toward classification review and sea trials
Illustrative geometry Concept rendering: supply vessel ahead towing the floating transfer structure to a receiving ship astern and laterally offset
Concept of operation. Supply vessel leads; receiver follows, laterally offset; the floating transfer structure terminates at a mobile connection unit.
01 — The Opportunity

Today, the Ship Goes to the Fuel.
That Detour Is the Product.

Marine fuel lives at ports and bunkering anchorages — so on many voyages the ship must leave its route, wait its turn, and then sprint to catch up its schedule. RoboFueler explores making fuel delivery part of the voyage instead of a reason to interrupt it.

⏱️

Skip the Detour — and the Catch-Up Sprint

A fuel detour plus anchorage wait can cost a day or more — and the sprint to recover the schedule burns fuel at a punishing rate, because engine power rises with roughly the cube of speed. Underway refueling removes both, which also matters under today's carbon rules (IMO CII, EU ETS, FuelEU).

📦

Carry Cargo, Not Extra Fuel

Every ton of reserve fuel a ship hauls across an ocean is a ton of paying cargo it can't. The squeeze tightens with new fuels — methanol needs roughly 2.4× the tank volume for the same voyage energy. A mid-route fuel option lets owners trade dead tankage for revenue, route by route.

⚓

A Force Multiplier for Naval Logistics

Fleet oilers are scarce, and very few commercial tankers can refuel warships because alongside rigs demand specialized crews. A stern-mounted, automated transfer kit is designed to turn ordinary tankers into stand-off auxiliary refuelers — including for uncrewed vessels that have no deck crew at all.

The market is already enormous — Singapore alone sold 54.92 million tonnes of bunker fuel in 2024 (MPA) — and honest scoping matters: ships that bunker during a scheduled cargo call may gain little. The prize is the voyage where fuel forces a detour, a queue, or dead tankage.

02 — How It Works

Keep the Hulls Apart.
Bring the Connection to the Ship.

Two moving ships side by side literally suck toward each other — squeezed water speeds up and its pressure drops, the same physics that pulls a shower curtain inward. Navies manage that danger with big trained crews; merchant ships simply can't. RoboFueler changes the geometry instead.

Industry Fact  Design Target  To Be Validated
INDUSTRY FACT

The Old Way — Side by Side, Fighting Suction

LOW-PRESSURE SUCTION ZONE squeezed water speeds up → pressure drops → the hulls are pulled together SUPPLY SHIP RECEIVING SHIP specialized rigs and trained line-handling crews on deck SPANWIRE + WINCHES — SUSPENDED HIGHLINE RIG TYPICALLY ~140–200 FT the cable rig constrains separation — range varies by rig and ships
PROPOSED GEOMETRY

The RoboFueler Way — In Line, Apart, Underway

SAME HEADING · SAME SPEED PROPELLER SLIPSTREAM / WAKE REEL SUPPLY VESSEL (LEADS) RECEIVING VESSEL (FOLLOWS · LATERALLY OFFSET) the buoyant structure floats its own weight — no suspended cable, no distance ceiling MOBILE TERMINAL TARGET: 300–500 FT offset outside the slipstream THE BIG HULLS NEVER RUN SIDE BY SIDE final envelope — separation · offset · speed · sea state — set by CFD, model tests & sea trials
Concept illustration Infographic: why ships are pulled into danger when they refuel alongside — hull interaction low-pressure zone, bow and stern turning moments, wind and waves, and the safer lead-follow geometry with the low-profile lay-flat bridge
Hydrodynamic interaction, wind, waves, and human factors compound alongside-transfer risk. The real solution is to change the geometry — not ask crews to outperform the physics.
Compare with existing transfer methods — fendered STS, naval alongside, legacy astern
Capability Commercial Fendered STS Naval Alongside UNREP Legacy Astern Single-Hose RoboFueler Stand-Off
Design Target
Transit speed during transfer Stopped / drift / anchored Underway, navy-crewed Slow (historically ~5–6 kn) Underway at transit-class speed
Hull separation Hull-to-hull on fenders ~140–200 ft, parallel Astern, in propeller wash 300–500 ft, laterally offset
Receiver deck-crew exposure High — lines, fenders, baskets High — line-handling gangs Bow grappling in a seaway None at the interface (design)
Transfer flow capacity High (cargo pumps, stopped) High (purpose-built rigs) Choked — one narrow hose 5 parallel channels (target)
Receiver hardware required Manifold + fenders/moorings Naval UNREP stations + crews Bow reception gear + crew Passive rails + manifold only
Uncrewed / USV receiver compatible No No No Yes — zero receiver crew required (design)

The transfer structure stows drained and lay-flat on a powered stern drum, deploys under control, and recovers section by section with verification before winding. A separate tow spine — tensile members with structural end fittings — carries the pulling load so the fluid containment never does.

Engineering concept Four-step concept sequence: deploy from the stern reel, operate low-profile, deflate and flatten, reel in for compact storage
Deploy → operate → deflate → reel in. A 400-foot fuel terminal that stows like a fire hose.

The conduit's own reinforced walls form the fluid containment — the chamber is the pipe. Liquid channels alternate with independently sealed air-flotation cells in a strict Y = X + 1 arrangement (always one more flotation cell than liquid path), intended to keep the structure positively buoyant and the fuel contained even if a channel is breached — failure behavior is subject to testing. One of the five channels can also be configured as a closed-loop vapor-return / inert-gas path, enabling zero-venting transfer of low-flashpoint fuels like methanol To Be Validated.

Engineering concept Cross-section of the lay-flat transfer structure showing longitudinal chambers, contained transfer lines, and lay-flat storage profile
Inside the lay-flat conduit. Isolated liquid passages between sealed flotation cells; specification values published as verified.

The FuelSled — a buoyant, propelled terminal — carries the conduit's end to the receiver's midship station and turns five liquid paths vertical against the hull. A compliant, sensor-guided capture system with wave-following motion compensation is intended to hold the connection as both structures rise and fall; its motion envelope and connection loads are defined deliverables of the validation program.

Engineering concept FuelSled mobile terminal concept with C-loop compensators and a 5-valve robotic connector
The FuelSled mobile terminal. Robotic capture, verified lock, wave-following connection.

Your ship does not buy a robot. It installs a standardized passive reception manifold — two vertical rails, a traveling manifold carriage, and piping to tanks — in a short yard or afloat window. No powered machinery, no hydraulics, no deck crew at the connection point. The objective is minimal retrofit scope and onboard maintenance — not exemption from class, flag, or inspection requirements.

That asymmetry is the business model: one supply vessel is designed to serve 50–100+ customer hulls, so the expensive machinery is bought once and amortized across the fleet, while each customer installs only the passive flange.

Engineering concept Receiver interface concept: two vertical rails with a traveling manifold carriage at the port-side midship
Two rails, one carriage, zero powered machinery. Capture alignment → ride the sea level → verify before transfer.
Fuel scope, stated plainly: the initial design basis is liquid petroleum marine fuels (VLSFO / MGO / HFO / F-76) and drop-in biofuel blends. Methanol is adaptable with compatible materials and closed-loop vapor return; LNG and ammonia require fundamentally different containment and safety architectures and are not claimed.
03 — Safety

What Happens When
Something Goes Wrong?

The honest answer for any new marine system is a designed sequence, tested until proven. No fuel valve opens until the lock and seal are verified — and no coupling releases until flow is stopped and the lines are cleared. Walk the sequence yourself, including the failures.

Operating-State & Fault-Injection Simulator

Design concept — sequence behavior is part of the test program
→
→
→
→
INJECT FAULT:
DETECTTrigger sensed & classified
→
ESD-1Pump trip & valve close
→
ISOLATEZero-flow verified both sides
→
ESD-2Dry-break release (if required)
→
RECOVERBuoyant float-free & retrieval
Click a normal stage above, or inject a fault, to walk the designed sequence.
Stand-off geometry changes the risks — it does not abolish them. It removes the two biggest killers of conventional transfers: hull-to-hull contact and crews handling lines in snap-back zones. It introduces its own engineering questions — floating-structure motion, connection loads, transient pressure, emergency release, spill prevention — each a defined validation objective with a test behind it, developed toward classification review (and COLREG "restricted in ability to maneuver" procedures) with flag and class input. The dry-break, double-containment safety hardware descends from proven offshore practice.
04 — Economics

Does It Pay? Run Your Own Route.

Not every voyage benefits — a ship bunkering during a scheduled cargo call may gain almost nothing, and this model will tell you so. The case lives where fuel forces a detour, a queue, or a schedule-recovery sprint. Every assumption below is yours to change.

Voyage, Speed-Trap & Carbon Simulator

All presets and defaults are illustrative — not a quote. Every field is editable.
PORT-DETOUR BUNKERING — total incremental cost—
ROBOFUELER UNDERWAY TRANSFER — illustrative cost—
Detour fuelTime value Port/tug/agencyV³ sprint burn Carbon costAt-sea premium
Sprint speed required to recover schedule
—
Difference per event
—
Annualized difference (your event count)
—
CO₂e avoided per event (detour + sprint burn)
—
Methodology — every equation
deviation hours = added nm ÷ speed  |  lost time = deviation hours + wait hours
detour fuel (t) = daily consumption × deviation hours ÷ 24  |  detour fuel cost = detour fuel × price
time-value cost = lost time ÷ 24 × day rate
sprint: V' = D_remaining ÷ (D_remaining÷V − lost time), capped at V + 2.5 kn (partial recovery if capped)
sprint extra fuel = (consumption × D_remaining ÷ (24 V)) × ((V'÷V)² − 1)  ←  burn ∝ V³, leg time ∝ 1/V'
CO₂e = (detour fuel + sprint fuel) × 3.1 t CO₂/t fuel (typical factor)
carbon cost = CO₂e × carbon price (illustrative; actual ETS/FuelEU coverage varies)
conventional total = detour fuel + time-value + port costs + sprint fuel + carbon cost
at-sea total = premium × bunker quantity + rendezvous hours ÷ 24 × day rate
difference = conventional − at-sea  |  annualized = difference × events/year

Outputs are scenario results from your inputs, not verified savings — and a negative difference means conventional bunkering wins for that voyage. For a documented comparison, submit a route with actual voyage data.

05 — Roadmap

Where It Stands.
What Gets Proven Next.

One roadmap, honestly marked. Click any milestone for what it requires and the evidence it will produce. Nothing is labeled complete without evidence; performance figures are targets until tested.

Confidential engineering material is available under NDA — request data-room access via the briefing form.

Long-term concept Long-term concept map: a network of floating fuel stations positioned along major ocean trade routes
The long-term vision: underway supply nodes along the world's trade routes. Shown as vision, not as a deployment plan.
06 — Who's Behind It & Hard Questions

Straight Answers —
Including "To Be Validated"

Inventor & IP Pedigree

RoboFueler was invented by Larry M Shultz, whose five-decade inventing career spans entertainment technology, consumer electronics, automotive safety systems, and clean-energy infrastructure, with patented and commercialized technologies across those fields. His current portfolio includes clean-refining, produced-water desalination, and emissions-to-fertilizer systems alongside RoboFueler.

Patent status: U.S. provisional and non-provisional applications covering the multi-chamber transfer structure, deployment reel systems, the mobile connection terminal, and the passive receiver interface were filed in 2026, with international (PCT) filing in progress. Claim scope is a matter for counsel and prosecution; no legal conclusion is implied.

How is this different from what navies already do — or from commercial ship-to-ship transfer?

Underway replenishment is established. RoboFueler's proposed contribution is a different combination: stand-off geometry, a buoyant floating transfer structure, a mobile connection terminal, and supply-side concentration of active equipment. Naval alongside UNREP runs two hulls ~140–200 ft apart with large trained crews; legacy astern refueling choked flow through one hose in the propeller wash; commercial STS requires stopping on fenders in calm weather. None refuels a merchant ship at transit speed with no deck crew at the interface — that is the gap this design targets.

What happens if either ship must maneuver immediately — or the connection can't release?

ESD-1 stops transfer and isolates both sides; if required, the dry-break release separates the terminal so each vessel maneuvers independently, and the buoyant structure floats free for recovery. An independent mechanical release path covers the jam case. Abort criteria, release loads, and maneuvering envelopes are validation-test deliverables.

What happens on loss of communications or power?

Design intent: default-safe states — transfer stops, valves close, and the mechanical release path depends on neither remote commands nor external power. Degraded-mode behavior will be defined by FMEA and demonstrated by test.

Where can underway transfers legally occur?

MARPOL Annex I Chapter 8 governs ship-to-ship transfer of oil cargo and expressly excludes bunkering from its scope; bunkering remains subject to coastal-, flag-, and port-state rules that vary by jurisdiction. Offshore corridor operations outside congested port limits run under flag-state, MARPOL, and industry STS frameworks — and the operating concept includes jurisdiction-specific notification procedures plus COLREG "restricted in ability to maneuver" signals during transfer.

How are fuel quantity and quality verified with no crew at the manifold?

Design intent: metered custody transfer on the supply side — mass-flow metering and automated sampling consistent with established bunkering standards — with documentation and live readout to the receiving bridge. The specific metering architecture is in development.

Is the operation unmanned? What does "autonomous" mean here?

No. Both vessels remain crewed and responsible for navigation. "Autonomous" means the terminal's capture-and-connect sequence is supervised and remotely monitored, eliminating routine personnel exposure at the connection point. The control architecture is developed against the emerging IMO MASS framework rather than assumed into existing approval regimes.

Why refuel at sea instead of just optimizing bunkering at berth?

For many port calls, berth bunkering alongside cargo operations is efficient — and will stay that way. The case for RoboFueler is the voyage where bunkering forces a deviation, a queue, a schedule-recovery sprint, or an otherwise unnecessary call. That is why the economics model lets conventional bunkering win when it should.

Who owns and operates the supply vessels?

The intended model: supply-side operators own the dispensing vessels and active equipment under license, while customer vessels carry only the passive interface. Commercial structure is in development with fleet and shipyard partners.

Build Your Briefing Request

Pick your role, add your vessel class or corridor, and send — or copy the formatted request for your own mail client.

Open Email

William Macht — President, RoboFueler  •  (703) 623-9729  •  william.macht@machtmaritime.com

Larry M Shultz — Inventor  •  (310) 980-9091  •  Larry@SablePower.com